Advanced technology and high efficiency three cylinder drum dryer
Description:
The three-cylinder dryer is an energy-saving product that is
improved on the basis of a single-cylinder rotary dryer. The rotary
three-cylinder dryer improves the internal structure of the
original single-cylinder dryer, increases the pre-drying of the wet
material before entering the machine and prolongs the drying time
of the wet material in the machine, plus sealing, heat preservation
and reasonable supporting measures. Compared with the original
single-cylinder dryer, the dryer production capacity is increased
by 48-80%, the evaporation capacity per unit volume can reach
120-180kg/m3, and the standard coal consumption is only 6-8kg/ton.
The technology is advanced, the operating parameters are
reasonable, the operation is simple and feasible, and it is widely
used in various industries such as slag, clay, coal, iron powder,
mineral powder and other mixed materials, dry mixed mortar in
construction industry, yellow sand, etc., as well as raw materials
in chemical industry, foundry and other industries. drying.
Parameter:
| Model (m) | Φ2*4.5 | Φ2.2*5 | Φ2.5*6 | Φ2.7*6.5 | Φ3*6.5 | Φ3.2*7 | Φ3.6*8 | Φ4.2*8 |
| Outer tube diameter (m) | 2 | 2.2 | 2.5 | 2.7 | 3 | 3.2 | 3.6 | 4.2 |
| Outer tube length (m) | 4.5 | 5 | 6 | 6.5 | 6.5 | 7 | 8 | 8 |
| Cylinder speed (r/min) | 4-10 | 4-10 | 4-10 | 4-10 | 4-10 | 4-10 | 4-10 | 4-10 |
| Intake air temperature | 700-750 | 700-750 | 700-750 | 700-750 | 700-750 | 700-750 | 700-750 | 700-750 |
| Production capacity (t/h) | 13-18 | 15-23 | 20-28 | 24-33 | 35-40 | 40-60 | 55-75 | 70-120 |
| Motor power (Kw) | 5.5*2 | 7.5*2 | 5.5*4 | 7.5*4 | 11*4 | 15*4 | 18.5*4 | 22*4 |
Working Principle :
Features:
1. The structure of the three-cylinder dryer adopts a sleeve type
to make the material dry quickly;
2, design the cylinder self-insulation, so that the thermal
efficiency reaches 80 or more;
3. The product structure is reasonable and the operation is stable;
4, the drying effect is good, the coal consumption per ton of dry
material is less than 8kg;
5. The fuel can be applied to coal oil and gas, and can dry the
powder material of block material below 20mm;
6. Compared with the single-cylinder dryer, the floor space is
reduced by 50, the soil construction is reduced by 50, and the
power consumption is reduced to 60;
7. Easily regulate the required final moisture index according to
user requirements;
8, the outlet temperature gas, the dust removal equipment is used
for a long time;
9, no need to rotate the large and small gears, using the roller to
rotate;
10, the discharge temperature is lower than 60 degrees, and can be
continuously produced and packaged;
Packaging & Delivery:
